Brodit vehicle charging station, TS, locking device, M60

Brodit vehicle charging station, TS, locking device, M60

BRODIT
Vehicle charging station, tilt swivel, interlock, incl.: vehicle power supply (12/24 V), fits for: M60
216026
Išparduota. Dėl užsakymo teirautis: [email protected]
171,00 € 206,91 € (su PVM)
Be PVM


help_outlineKlausti apie prekę
Brodit vehicle charging station, TS, locking device, M60

Brodit vehicle charging station, TS, locking device, M60

Vehicle charging station, tilt swivel, interlock, incl.: vehicle power supply (12/24 V), fits for: M60

 

Tos pačios serijos prekės

Brodit pedestal mount , 6.5

Brodit pedestal mount , 6.5

202010
Pedestal mount 6.5'', total length: 165 mm, with ball and wing nut, AMPS holes

48,50 € be PVM

Brodit Mounting bracket

Brodit Mounting bracket

213457
Mounting bracket, optimized for touch screens, PDAs, taximeter screens and printers

69,75 € be PVM

Brodit Vehicle Mount

Brodit Vehicle Mount

213476
Vehicle Mount, fits for: Mercedes Benz Actros 4 13-19

69,75 € be PVM

Brodit wingnut

Brodit wingnut

215670
Wingnut, for Pedestal Mount

26,00 € be PVM

Brodit tripple suction mount

Brodit tripple suction mount

215675
Tripple suction cup holder, 2 x AMPS holes, weight: 459 g

98,50 € be PVM

Brodit mount, MMC, PM, QLn320

Brodit mount, MMC, PM, QLn320

215842
Mount, MultiMoveClip, 2'' Pedestal Mount, fits for: QLn320

164,75 € be PVM

Brodit Pedestal Mount

Brodit Pedestal Mount

215888
Heavy Duty Pedestal Mount, max. width: 87mm, length: 114mm

214,75 € be PVM

Brodit pedestal mount for forklift, L: 140 mm, W: 72 mm

Brodit pedestal mount for forklift, L: 140 mm, W: 72 mm

215978
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 72 mm, AMPS holes, incl: Screws, nuts, washers, Allen wrenches

103,50 € be PVM

Brodit pedestal mount for forklift, L: 172 mm, W: 97 mm

Brodit pedestal mount for forklift, L: 172 mm, W: 97 mm

215981
Forklift pedestal mount Lite, length: 172 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrench

107,25 € be PVM

Brodit holder, passiv

Brodit holder, passiv

216012
Holder, passiv, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series

64,75 € be PVM

Brodit charging station (MOLEX),TC20

Brodit charging station (MOLEX),TC20

216023
Charging station (MOLEX),12/24 V, MOLEX, vibration-resistant, ABS/Acetal, AMPS holes, fits for: TC20 (with pistol grip)

189,75 € be PVM

Brodit wall/table mount, Alpha-3RW

Brodit wall/table mount, Alpha-3RW

216073
Wall/table mount, with MultiMoveClip, ABS/Acetal, fits for: Alpha-3RW

123,50 € be PVM

Brodit charging station (MOLEX), MC3300

Brodit charging station (MOLEX), MC3300

216085
Charging station (MOLEX), 10-30 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300 with pistol grip

181,00 € be PVM

Brodit charging station (MOLEX), locking, MC3300

Brodit charging station (MOLEX), locking, MC3300

216088
Charging station (MOLEX), tilt swivel, interlock, 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC3300

248,50 € be PVM

Brodit charging station, TC21/26

Brodit charging station, TC21/26

216137
Charging station, desktop, fits for: Zebra TC21/TC26

133,50 € be PVM

Brodit mount, passive

Brodit mount, passive

216200
Mount, passive, with lock, fits for: MC3300R

147,25 € be PVM

Brodit voltage converter

Brodit voltage converter

216240
Voltage converter, 48 VAC, 12 VDC, fits for: ET5X

159,75 € be PVM

Brodit holder, TS, SM10, SM15

Brodit holder, TS, SM10, SM15

511755
Holder, tilt swivel, fits for: SM10, SM15, SM20 (without protective case)

51,00 € be PVM

Brodit holder, TS, SM10, SM15, SM20

Brodit holder, TS, SM10, SM15, SM20

511756
Holder, tilt swivel, fits for: SM10, SM15, SM20 (with protective case)

66,00 € be PVM

Brodit holder, TS, ET5X (10 inch)

Brodit holder, TS, ET5X (10 inch)

511784
Holder, tilt swivel, fits for: ET5X (10 inch)

53,50 € be PVM

Brodit holder, TS, height: 120 mm to 150 mm

Brodit holder, TS, height: 120 mm to 150 mm

511848
Holder, adjustable holder, tilt swivel, ABS/Acetal, fits for: Trays with a height of 120 mm to 150 mm and a thickness of up to 25 mm

84,75 € be PVM

Brodit holder, TS, TC5X

Brodit holder, TS, TC5X

511926
Holder, tilt swivel, fits for: TC5X (with protective case)

51,00 € be PVM

Brodit vehicle charging station, TS, DL-Axist

Brodit vehicle charging station, TS, DL-Axist

512833
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: DL-Axist (without protective case)

118,50 € be PVM

Brodit vehicle charging station, TS, DL-Axist

Brodit vehicle charging station, TS, DL-Axist

512834
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: DL-Axist (with protective case)

118,50 € be PVM

Brodit charging station (MOLEX),MC55, MC65, MC67

Brodit charging station (MOLEX),MC55, MC65, MC67

513013
Charging station (MOLEX),10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC55, MC65, MC67

109,75 € be PVM

Brodit charging station (MOLEX), TS, SM10, SM15

Brodit charging station (MOLEX), TS, SM10, SM15

513756
Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: SM10, SM15 (with protective case)

124,75 € be PVM

Brodit holder, TS, with lock, ET50 (8''), ET55 (8'')

Brodit holder, TS, with lock, ET50 (8), ET55 (8)

539777
Holder, tilt swivel, with lock (incl.: two keys), fits for: ET50 (8''), ET55 (8'')

97,25 € be PVM

Brodit charging station (MOLEX),with lock, ET5X (10'') (protective case)

Brodit charging station (MOLEX),with lock, ET5X (10) (protective case)

539892
Charging station (MOLEX),with lock (incl.: two keys), fits for: ET5X (10'') (protective case)

388,50 € be PVM

Brodit charging station (MOLEX),with lock, ET5X (8'') (protective case, extension module)

Brodit charging station (MOLEX),with lock, ET5X (8) (protective case, extension module)

539893
Charging station (MOLEX),with lock (incl.: two keys), order separate: power supply, fits for: ET5X (8'') (protective case, extension module)

413,50 € be PVM

Brodit holder, with lock, ET5X (8'') (protective case)

Brodit holder, with lock, ET5X (8) (protective case)

539961
Holder, with lock (incl.: two keys), USB, power supply port, fits for: ET5X (8'') (protective case)

429,75 € be PVM

Brodit holder, with lock, ET5X (10'') (protective case)

Brodit holder, with lock, ET5X (10) (protective case)

550888
Holder, with lock (incl.: two keys), ABS/Acetal, fits for: ET5X (10'') (protective case)

418,50 € be PVM

Brodit mount, passive, SM10, SM15

Brodit mount, passive, SM10, SM15

710158
Mount, passive, with vibration dampeners, AMPS, fits for: SM10, SM15

106,00 € be PVM

Brodit holder, TS, TC20/25

Brodit holder, TS, TC20/25

711029
Holder, tilt swivel, fits for: TC20/25 (with extended battery)

51,00 € be PVM

Brodit holder, TS, interlock, MC3300

Brodit holder, TS, interlock, MC3300

711040
Holder, tilt swivel, interlock, fits for: MC3300 (with pistol grip)

151,00 € be PVM

Brodit Passive Holder

Brodit Passive Holder

711044
Passive holder with tilt swivel, fits for: Ingenico iSMP4

44,75 € be PVM

Brodit holder, TS, interlock, MC3300

Brodit holder, TS, interlock, MC3300

711056
Holder, tilt swivel, with lock, display facing the holder, fits for: MC3300 (with pistol grip)

151,00 € be PVM

Brodit mount, passive, SM10, SM15

Brodit mount, passive, SM10, SM15

711157
Mount, passive, AMPS, fits for: SM10, SM15

97,25 € be PVM

Brodit holder, TS, SL10

Brodit holder, TS, SL10

711159
Holder, tilt swivel, fits for: SL10 (w/o rugged boot)

51,00 € be PVM

Brodit holder, TS

Brodit holder, TS

711228
Holder, tilt swivel, fits for: Memor 10 (protection boot)

51,00 € be PVM

Brodit vehicle charging station, TS, TC20/25

Brodit vehicle charging station, TS, TC20/25

712019
Vehicle charging station, tilt swivel, cable type: straight, incl: vehicle power supply (12/24 V), fits for: TC20/25

118,50 € be PVM

Brodit vehicle charging station, TS, TC20/25

Brodit vehicle charging station, TS, TC20/25

712029
Vehicle charging station, tilt swivel, cable type: straight, incl: vehicle power supply (12/24 V), fits for: TC20/25 (with extended battery)

118,50 € be PVM

Brodit vehicle charging station, TS, EDA70/EDA71

Brodit vehicle charging station, TS, EDA70/EDA71

712085
Vehicle charging station, tilt swivel, cable type: straight, incl: vehicle power supply (12/24 V), fits for: EDA70

128,50 € be PVM

Brodit charging station (MOLEX),TC2X

Brodit charging station (MOLEX),TC2X

713151
Charging station (MOLEX),12/24 V, MOLEX, ABS/Acetal, AMPS holes, fits for: TC2X (with protective boot SG-TC2X-BOOT-01)

118,50 € be PVM

Brodit mount, active, SM10, SM15

Brodit mount, active, SM10, SM15

712157
Holder, active, AMPS, with cig-plug cable, fits for: SM10 (pistol grip), SM15 (pistol grip)

163,50 € be PVM

Brodit mount, active, SM10, SM15

Brodit mount, active, SM10, SM15

712158
Holder, active, AMPS, with vibration dampeners, with cig-plug cable, fits for: SM10, SM15

172,25 € be PVM

Brodit vehicle charging station, TS, SL10

Brodit vehicle charging station, TS, SL10

712159
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: SL10 (w/o rugged boot)

118,50 € be PVM

Brodit active holder

Brodit active holder

712210
Active holder with cig-plug - VeriFone V400m

109,75 € be PVM

Brodit vehicle charging station, TS, Tab Active 2, Tab Active 3

Brodit vehicle charging station, TS, Tab Active 2, Tab Active 3

712224
Vehicle charging station, tilt swivel, cable type: straight, incl: vehicle power supply (12/24 V), fits for: Galaxy Tab Active 2 (SM-T390/SM-T395), Samsung Galaxy Tab Active 3 (SM-T570/SM-T575)

99,75 € be PVM

Brodit Active Mount

Brodit Active Mount

712292
Active Mount, for device with Rugged Boot, with a tilt swivel,cig-plug-adapter, 3A, 12/24V, fits for: M3 Mobile SL20

128,50 € be PVM

Brodit charging station (MOLEX), TS, TC20/25

Brodit charging station (MOLEX), TS, TC20/25

713029
Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl: Power supply unit (open cable end), fits for: TC20/25 (with extended battery)

118,50 € be PVM

Brodit vehicle charging station, TS, TC2X

Brodit vehicle charging station, TS, TC2X

712151
Vehicle charging station, tilt swivel, incl: vehicle power supply (12/24 V), fits for: TC2X (with protective boot SG-TC2X-BOOT-01)

118,50 € be PVM

Brodit charging station (MOLEX), TS, SM10, SM15

Brodit charging station (MOLEX), TS, SM10, SM15

713157
Charging station (MOLEX), tilt swivel, 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: SM10, SM15 with bumper and pistol grip

163,50 € be PVM

Brodit charging station (MOLEX), TS, VD, SM10, SM15

Brodit charging station (MOLEX), TS, VD, SM10, SM15

713158
Charging station (MOLEX), vibration dampeners, tilt swivel, 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: SM10, SM15 with bumper and pistol grip

172,25 € be PVM

Brodit holder, TS, SL10

Brodit holder, TS, SL10

713159
Holder, tilt swivel, incl.: Power supply (open cable end), fits for: SL10 (w/o rugged boot)

118,50 € be PVM

Brodit Active charging station

Brodit Active charging station

713197
Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: TC21, TC26

118,50 € be PVM

Brodit charging station (MOLEX), TS, Tab Active 2, Tab Active 3

Brodit charging station (MOLEX), TS, Tab Active 2, Tab Active 3

713224
Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl: Power supply unit (open cable end), fits for: Galaxy Tab Active 2 (SM-T390/SM-T395), Samsung Galaxy Tab Active 3 (SM-T570/SM-T575)

121,00 € be PVM

Brodit vehicle charging station

Brodit vehicle charging station

713266
Vehicle charging station, drilling: AMPS, VESA 75, Module Upgrade, order separately: vehicle mount, vehicle adapter, fits for: ET5X (10.1'' with rugged frame)

299,75 € be PVM

Zebra ET5x 10.1 Module Upgrade

Zebra ET5x 10.1 Module Upgrade

739266
Zebra ET5x Passiv Mount lockable, 10.1 Module Upgrade, 2 keys included, for robust frame, with/without expansion module/handstrap. AMPS+VESA 75 holes. Module Upgrade Cradle.

198,50 € be PVM

Zebra ET5x Passiv Mount

Zebra ET5x Passiv Mount

739267
Zebra ET5x Passiv Mount, 8.4 Module Upgrade, 2 keys included, for robust frame, with/without expansion module/handstrap. AMPS+VESA 75 holes. Module Upgrade Cradle.

192,25 € be PVM

Brodit Passive Mount

Brodit Passive Mount

741296
Passive Mount, with pring stud locking, compatible with expansion back, handstrap and rugged boot, AMPS, VESA 75, fits for: ET80, ET85

221,00 € be PVM

Brodit Pedestal mount, 6

Brodit Pedestal mount, 6

215838
Pedestal mount 6'', total length: 164 mm, round base, AMPS holes

134,75 € be PVM

Brodit Passive Holder

Brodit Passive Holder

510813
Passive Holder, AMPS, VESA, fits for: F110G5 or older

99,75 € be PVM

Brodit holder, with lock, ET5X (10'') (protective case, extension module)

Brodit holder, with lock, ET5X (10) (protective case, extension module)

539960
Holder, with lock (incl.: two keys), fits for: ET5X (10'') (protective case, extension module)

433,50 € be PVM

Brodit pedestal mount , 7.5

Brodit pedestal mount , 7.5

202011
Pedestal mount 7.5'' with suction cup, total length: 190 mm, with ball and wing nut, AMPS holes

57,25 € be PVM

Brodit charging station (MOLEX), TS, 3-point, TC7X

Brodit charging station (MOLEX), TS, 3-point, TC7X

531707
Charging station (MOLEX), tilt swivel, 3-point, 10/24 V, MOLEX, incl: Power supply unit (open cable end), fits for: TC7X

118,50 € be PVM

Brodit pedestal mountr, 5.0

Brodit pedestal mountr, 5.0

202016
Pedestal mount 5'', Total length: 132 mm, With ball and wing nut, AMPS holes

48,50 € be PVM

Brodit power supply, open cable end, ET5X

Brodit power supply, open cable end, ET5X

941012
Power supply unit, MOLEX, open cable end, input and output voltage: 12 V, 3A, fits for: Brodit charger for ET5X

84,75 € be PVM

Brodit vehicle mount

Brodit vehicle mount

711307
Vehicle holder, tilt swivel, fits for: TC53/58

52,25 € be PVM

Brodit vehicle charging station, TS, TC53/58

Brodit vehicle charging station, TS, TC53/58

712306
Vehicle charging station, tilt swivel, incl.: vehicle power supply (12/24 V), fits for: TC53/58 (with rugged boot)

128,50 € be PVM

Brodit Pedestal Mount

Brodit Pedestal Mount

202024
Heavy duty Pedestal Mount, length: 180mm, with ball head and wingnut, mounting plate 42x50 mm with 4 mm AMPS-holes, loading weight: 3kg

69,75 € be PVM

Brodit Mounting Plate with MultiMoveClip

Brodit Mounting Plate with MultiMoveClip

216461
Mounting Plate with MultiMoveClip, fits for: TM-P8011-101, TM-P8011-121

99,75 € be PVM

Brodit Cig Plug Adapter Kit

Brodit Cig Plug Adapter Kit

216462
Cig Plug Adapter Kit, includes Adapter with 1x USB-A and 1x USB-C Port, Power Cord, Screws and Mounting Clips, fits for: TM-P8011-121, TM-P8011-101, TM-P211

68,50 € be PVM

Brodit Fly Lead Kit

Brodit Fly Lead Kit

216463
Fly Lead Kit for fixed installation, incl.: Clips and Screws, fits for: TM-P8011-121, TM-P8011-101, TM-P211 

86,00 € be PVM

Brodit Passive Holder

Brodit Passive Holder

216239
Passive Holder, 83x124x58 mm (WxHxD) internal, fits for: Scanner or Devices with Pistol Grip

53,50 € be PVM

Brodit MultiMoveClip

Brodit MultiMoveClip

216460
MultiMoveClip, easy mounting solution, AMPS, ABS/Acetal Plastic, color: Black, fits for: TM-P211

97,25 € be PVM

Brodit vehicle charging station, interlock, MC9300

Brodit vehicle charging station, interlock, MC9300

712135
Vehicle charging station, interlock, cable type: straight, incl: vehicle power supply (12/24 V), fits for: MC9300

233,50 € be PVM

Brodit holder, TS, interlock, FZ-A2

Brodit holder, TS, interlock, FZ-A2

541970
Holder, tilt swivel, interlock, fits for: FZ-A2

97,25 € be PVM

Getac lockable Holder Passive

Getac lockable Holder Passive

739287
Passive Holder, VESA 75/100, AMPS, compatible with or without handstrap, lockable, 2 Keys, for: F110G6

146,00 € be PVM

Brodit holder, with lock, TC8000

Brodit holder, with lock, TC8000

510875
Holder, with closure, fits for: TC8000

156,00 € be PVM

Brodit vehicle mount

Brodit vehicle mount

711306
Vehicle holder, tilt swivel, fits for: TC53/58 (with rugged boot)

52,25 € be PVM

Brodit dual suction mount

Brodit dual suction mount

215671
Dual suction cup holder, 2 x AMPS holes, weight: 326 g

76,00 € be PVM

Brodit Printer Mount

Brodit Printer Mount

217072
Printer Mount with label roll function, AMPS, fits for: RP4, RP4F

307,25 € be PVM

Brodit vehicle charging station, TS, TC53/TC58

Brodit vehicle charging station, TS, TC53/TC58

712307
Vehicle charging station, fixed installation, tilt swivel, drilling: AMPS, incl.: vehicle power supply (12/24 V), fits for: TC53/TC58 (without protective case)

128,50 € be PVM

Samsung tabletop holder

Samsung tabletop holder

216080
Tabletop holder, fits for: Samsung Galaxy Tab Active Pro

388,50 € be PVM

Brodit pipe mount with mounting plate, 31-50 mm

Brodit pipe mount with mounting plate, 31-50 mm

215944
Pipe Mount / Bar Grip, swivel head plate, 50x42 mm, for round pipes 31-50 mm, AMPS holes

62,25 € be PVM

Brodit holder, interlock, FZ-G1 (hand strap)

Brodit holder, interlock, FZ-G1 (hand strap)

541651
Holder, interlock, fits for: FZ-G1 (hand strap)

112,25 € be PVM

Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm

Brodit pedestal mount for forklift, L: 140 mm, W: 97 mm

215980
Forklift pedestal mount Lite, length: 140 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 97 mm, AMPS holes, incl: screws, nuts, washers, Allen wrenches

107,25 € be PVM

Peržiūrėti
Brodit mount, MMC, QLn420

Brodit mount, MMC, QLn420

216004
Mount, with MultiMoveClip, ABS/Acetal, AMPS holes, fits for: QLn420

76,00 € be PVM

Peržiūrėti
Brodit holder, passiv, VD

Brodit holder, passiv, VD

216013
Holder, passiv, vibration damper, ABS/Acetal, AMPS holes, fits for: LI3600 Series, DS3600 Series

96,00 € be PVM

Peržiūrėti
Brodit holder, with lock, L10

Brodit holder, with lock, L10

216098
Holder, with lock (incl.: two keys), fits for: L10, order separately: XDIM module

191,00 € be PVM

Peržiūrėti
Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)

Brodit holder, reinforced, ET5X (10 inch, Rugged Frame)

511914
Bracket, reinforced, ABS, fits for: ET5X (10 inch, Rugged Frame)

172,25 € be PVM

Peržiūrėti
Brodit charging station (MOLEX),with lock, ET5X (8'') (protective case)

Brodit charging station (MOLEX),with lock, ET5X (8) (protective case)

539894
Charging station (MOLEX),with lock (incl.: two keys), fits for: ET5X (8'') (protective case)

373,50 € be PVM

Peržiūrėti
Brodit charging cradle, USB, ET5X (10'')

Brodit charging cradle, USB, ET5X (10)

563914
Charging cradle, USB, fits for: ET5X (10'', with protective case), to be ordered separately: Power supply

403,50 € be PVM

Peržiūrėti
Brodit vehicle holder

Brodit vehicle holder

710266
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (10.1'' with rugged frame)

144,75 € be PVM

Peržiūrėti
Brodit vehicle holder

Brodit vehicle holder

710267
Vehicle holder, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, fits for: ET5X (8.4'' with rugged frame)

138,50 € be PVM

Peržiūrėti
Brodit holder, TS, MC3200

Brodit holder, TS, MC3200

711027
Holder, tilt swivel, fits for: MC3200

51,00 € be PVM

Peržiūrėti
Brodit holder, tilt swivel

Brodit holder, tilt swivel

711156
Holder, tilt swivel, fits for: Samsung Galaxy Note 10+

44,75 € be PVM

Peržiūrėti
Brodit holder, TS, UL20

Brodit holder, TS, UL20

711171
Holder, tilt swivel, fits for: UL20

86,00 € be PVM

Peržiūrėti
Brodit holder, TS, TC21, TC26

Brodit holder, TS, TC21, TC26

711197
Holder, tilt swivel, fits for: TC21, TC26

51,00 € be PVM

Peržiūrėti
Brodit holder, TS

Brodit holder, TS

711227
Holder, tilt swivel, fits for: Memor 10

51,00 € be PVM

Peržiūrėti
Brodit vehicle charging station, TS, EDA51

Brodit vehicle charging station, TS, EDA51

712099
Vehicle charging station, tilt swivel, cable type: straight, incl: vehicle power supply (12/24 V), fits for:Honeywell EDA51

118,50 € be PVM

Peržiūrėti
Brodit vehicle charging station, MC9300

Brodit vehicle charging station, MC9300

712134
Vehicle charging station, cable type: straight, incl: vehicle power supply (12/24 V), fits for: MC9300

203,50 € be PVM

Peržiūrėti
Brodit charging station (MOLEX), TS, EDA70

Brodit charging station (MOLEX), TS, EDA70

713085
Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl: Power supply unit (open cable end), fits for: EDA70

128,50 € be PVM

Peržiūrėti
Brodit vehicle charging station

Brodit vehicle charging station

713267
Vehicle charging station, drilling: AMPS, VESA 75, module upgrade, order separately: vehicle mount, vehicle adapter, fits for: ET5X (8.4'' with rugged frame)

294,75 € be PVM

Peržiūrėti
Brodit vehicle charging station, TS, SM10, SM15, SM20

Brodit vehicle charging station, TS, SM10, SM15, SM20

721036
Vehicle charging station, tilt swivel, cable type: straight, incl: vehicle power supply (12/24 V), fits for: SM10, SM15, SM20 (with protective case)

139,75 € be PVM

Peržiūrėti
Brodit charging station (MOLEX), TS, XCover Pro

Brodit charging station (MOLEX), TS, XCover Pro

727214
Charging station (MOLEX), tilt swivel, 10/24 V, MOLEX, incl.: Power supply (open cable end), fits for: XCover Pro (with OtterBox uniVERSE)

128,50 € be PVM

Peržiūrėti
Brodit vehicle charging station, lockable

Brodit vehicle charging station, lockable

736266
Vehicle charging station, drilling: AMPS, VESA 75, lockable, Module Upgrade, incl.: 2 keys, order separately: vehicle mount, vehicle adapter, fits for: ET5X (10.1'' with rugged frame)

354,75 € be PVM

Peržiūrėti
Brodit Active Mount

Brodit Active Mount

747267
Active Mount, for devices with Rugged Frame, with or without expansion module / handstrap, order separately: power supply, USB-A Host, Upgrade Module, fits for: ET5x (8'')

336,00 € be PVM

Peržiūrėti
Brodit USB-Hub for ET5x

Brodit USB-Hub for ET5x

216258
USB-Hub for ET5x, 3x USB-A, 1x Ethernet, fits for: Module upgrade cradles

103,50 € be PVM

Peržiūrėti
Brodit vehicle charging station, TS, USB host, TC5X

Brodit vehicle charging station, TS, USB host, TC5X

712049
Vehicle charging station, tilt swivel, with USB host connection, cable type: straight, incl: vehicle power supply (12/24 V), fits for: TC5X (with protective case)

179,75 € be PVM

Peržiūrėti
Brodit active holder, Zebra ET4x

Brodit active holder, Zebra ET4x

712320
Cigarette Lighter Adapter, fits for: Zebra ET4x 10'' with Rugged-Frame

193,50 € be PVM

Peržiūrėti
Brodit vehicle power supply, ET5X

Brodit vehicle power supply, ET5X

941017
Vehicle power supply, input and output voltage: 12 V, 3A, fits for: Brodit charger for ET5X

84,75 € be PVM

Peržiūrėti
Brodit Passive Mount

Brodit Passive Mount

739318
Passive Mount, Module Upgrade, Lock incl. 2 keys, compatible with Rugged Boot or Exoskeleton, AMPS, VESA75 fits for: ET40/ET45 (8'')

147,25 € be PVM

Peržiūrėti
Brodit Pedestal mount, 10

Brodit Pedestal mount, 10

202020
Pedestal mount 10'', total length: 251 mm, with ball and wing nut, AMPS holes

61,00 € be PVM

Peržiūrėti
Brodit holder, ZQ630

Brodit holder, ZQ630

216113
Holder, fits for: ZQ630

89,75 € be PVM

Peržiūrėti
Brodit charging station (MOLEX), MC9300

Brodit charging station (MOLEX), MC9300

713134
Charging station (MOLEX), 12/24 V, MOLEX, incl.: Power supply (open cable end), fits for: MC9300 with pistol grip

233,50 € be PVM

Peržiūrėti
Brodit Pedestal Mount

Brodit Pedestal Mount

215836
Pedestal Mount with wingnut, length: 62 mm, round base, square mounting plate 50x50mm, color: Black

103,50 € be PVM

Peržiūrėti
Brodit Power Supply

Brodit Power Supply

941026
Power Supply, 220V, 5,4V output, with 6-Pin Molex, incl. EU, UK, US, AUS

58,50 € be PVM

Peržiūrėti
Brodit pedestal mount for forklift, L: 172 mm, W: 72 mm

Brodit pedestal mount for forklift, L: 172 mm, W: 72 mm

215979
Forklift pedestal mount Lite, length: 172 mm, for rods and tubes from 5 mm to 130 mm thick, width max: 72 mm, AMPS holes, incl: screws, nuts, washers, Allen wrench

103,50 € be PVM

Peržiūrėti
Brodit Passive Mount

Brodit Passive Mount

739301
Passive Mount, with key-lock, incl. 2 keys, only compatible with rugged boot, AMPS, VESA 75, fits for: ET80, ET85

207,25 € be PVM

Peržiūrėti
Brodit Active Holder, USB

Brodit Active Holder, USB

721335
Active holder, 12/24V, 3.0A, Tilt Swivel, incl. USB-Cable and cig-plug, order separately: protective boot, fits for: CT30XP

118,50 € be PVM

Peržiūrėti
Brodit Mounting Plate

Brodit Mounting Plate

215987
Mounting Plate, aluminum, VESA 75 and 100 holes

39,75 € be PVM

Peržiūrėti
Brodit holder, TS, MC55, MC65, MC67

Brodit holder, TS, MC55, MC65, MC67

511013
Holder, tilt swivel, fits for: MC55, MC65, MC67

44,75 € be PVM

Peržiūrėti
 
Gaminio serija
Brodit mounting solutions

Informuojame, kad šioje svetainėje naudojami slapukai (angl. cookies). Sutikdami, uždarykite pranešimą arba naršykite toliau. Savo duotą sutikimą bet kada galėsite atšaukti pakeisdami savo interneto naršyklės nustatymus ir ištrindami įrašytus slapukus.